Amorphous Alloy Transformer

Amorphous Alloy Transformer

An amorphous metal transformer is a type of energy efficient transformer found on electric grids. The magnetic core of this transformer is made with a ferromagnetic amorphous metal. The typical material is an alloy of iron with boron, silicon, and phosphorus in the form of thin foils. These materials have high magnetic susceptibility, very low co ercivity and high electrical resistance.

http://www.farady-electric.com/amorphous-core-transformer/

Farady automatic voltage booster Features

Farady automatic voltage booster Features:
1, the automatic pressure control without condensate pump without a motor, steam or compressed air driven, automatic condensate recovery.
2, automatic voltage stabilizer condensate can be pressurized pressurizer 0 ℃ ~ 170 ℃ non-corrosive cleaning liquid. Under a variety of conditions in the pressurized condensate back to the boiler room or reuse to dramatically improve return rates and full utilization of secondary steam. Generally steam savings of 14 to 22%, if the continuous steam 1 ton / hour meter, annual savings of 1200 tons of steam, six months to recover the cost of equipment.
3, automatic condensate discharged pressurized condensed water pressure full flow, does not produce secondary steam. Condensate pipe diameter than soda mixed flow and pressure to form small diameter pipes 48 to 67%, saving 1/3 of the pipe, and the pipe can reduce atmospheric corrosion
eclipse.
4, condensation water automatic pressurizer small size, can be dispersed or concentrated disposed on the wall or floor pit, a small amount of civil works, simple structure, easy to install, easy to maintain.
5, automatic compression condensate run no noise, no vibration, stable and reliable performance.

Farady transformer allows operation mode

Farady transformer allows operation mode
First, Farady transformer top oil temperature should not run often exceeds 85 ℃, the maximum should not exceed 95 ℃.
Second, the voltage applied to the voltage taps shall not exceed 5% of the rated value.
Third, Farady transformer overload can under normal and accident conditions of overload operation, normal farady auto load booster can often use, which allows the value of a front load curve of the transformer, the temperature of the cooling medium and transformer overload load carried by the unit fixed by the competent technical staff. In the case of an accident, 30% overload license to run two hours, but the top oil temperature must not exceed 85℃.

Single Phase Pole Mounted Transformer

Single Phase Pole Mounted Transformer (conventional type)

Farady Electric manufacture a complete range of single-phase and three phase overhead distribution transformers, we always designed with increased margins of safety and reliablity,and meet the following standard:

IEC60076,ANSI/IEEEC57.12.00, C57.12.20, C57.12.90, BS171, SABS 780 etc

http://www.farady-electric.com/single-phase-pole-mounted-transformer-conventional-type/

Completely Self-protected Transformer (CSP type)

Completely Self-protected Transformer (CSP type)

Farady Electric manufacture a complete range of overhead and pad mounted type distribution transformers, including single phase and three phase pole mounted conventional, complete self-protection (CSP),step down transformer, pad mounted & compact substation transformer, step voltage regulator etc,

http://www.farady-electric.com/completely-self-protected-transformer-csp-type/