The application about high voltage auto load booster

Applied in the utility’s distribution systems are generally medium-voltage mechanical high voltage regulator(SVR). It should be noted that there are two distinct types of AC auto load booster: Medium-voltage step voltage regulator(mechanical) and the Low-voltage step voltage regulators(mechanical or electronic). The difference in their operation and design clearly demonstrate that their applications are not the same. The latter is intended to protect end-user devices from overvoltage and undervoltage conditions.Nonetheless, this post will focus on the high voltage auto load booster, which is primarily used by the electric utility to compensate for the voltage drop in the feeders or distribution systems. In addition, the term step voltage regulator is often used to refer to utility SVR.step voltage regulator tap changer with motor and internal power supply Laser-scribed andized aluminum nameplates used for step voltage regulator.

SVR high voltage auto load booster with you, “The Utilities”, in mind

Variation of voltage can have detrimental effects on Utilities and their customers. To prevent customer complaints, loss of revenue due to sub-normal voltage, and increased costs due to higher line losses, FARADY has designed the SVR high voltage auto load booster with you, “The Utilities”, in mind. 

high voltage auto load booster Product Features

•high voltage auto load booster with external welds are 100% coverage for added strength and corrosion withstand.
• Lift ears allow sling lifting while the unit is still banded to the pallet.
• The tank bottom weld is recessed for added protection.
• The 50 kva pole mount transformer paint finish exceeds all ANSI requirements including 160in-lb impact, 2000 hour salt spray, 1000 hours QUV and 20 cycle SCAB.

automatic voltage booster for usual service conditions

automatic voltage booster are designed and manufactured in compliance with all applicable ANSI and RUS standards. All transformers are oil filled, 65˚C rise, and designed for usual service conditions per ANSI C57.12.00.
kiosk transformers ratings are available in 5 through 250 kVA with primary voltages 2.4 kV through 19.9 kV (150 kV BIL) and low voltages up to 600 volts.

Tap changers compensate for high voltage auto load booster

high voltage auto load booster tap changers compensate for small voltage variations along the distribution system. The externally-operated tap changer is a single-phase, five-position design for de-energized operation.
conventional pole transformer with a dual voltage switch permits use of the same transformer on distribution systems with different system voltages.

Farady high voltage auto load booster with the instantaneous overload

Farady high voltage auto load booster suitable for a wide range of load, with the instantaneous overload, the regulator (power supply) can be long-term continuous work, manual / automatic free to switch.
The single pole transformer (power supply) with over-voltage, over-current, phase, phase sequence protection and mechanical failure automatic protection, and the regulator (power supply) small size, light weight, easy to use, run Reliable and so on.