Farady auto load booster works

Farady auto load booster from the water chamber, pressurized chamber, control and control of the system.
Water chamber: for the moisture separator and saved as part of condensate and condensate supplied to the compression chamber.
Pressurizing chamber: When the pressurized chamber filled with condensate in steam or compressed air to the pressure output.
Control tube: Side-mounted monitor level control. When the level reaches the high point of the controller, the intake port is opened, then closed the exhaust port, the pressurized gas into the pressure chamber through the check valve under pressure condensate discharge; when the liquid level reaches the controller lows
, The intake port is closed, then the exhaust port is opened, the pressurized gas is cut off, while the pressurizing chamber is discharged residual gas, condensate by gravity from the tank into the pressure chamber through the check valve, from the tank through the check valve into the control tube.
Control system for the automatic control system, automatic run unattended. Nonetheless, this will focus on the high voltage auto load booster, which is primarily used by the electric utility to compensate for the voltage drop in the feeders or distribution systems.