1, Farady high voltage auto load booster can be resolved due to peak power consumption of high voltage power grid is too low (less than 10KV) lead to low voltage low voltage (300V-360V) equipment can not function properly.
2, this product can solve the high voltage grid voltage is normal, the transformer is too far from the electrical equipment, the output can not reach more than 380V, but because the low voltage line is too long (2300 meters) so that the equipment can not run properly.
3, the product due to the use of excessive number of electrical equipment, resulting in the use of voltage is too low, can not meet all the equipment to start running.
As shown in Figure 4, this product than the unit generator power generation costs can be about 40-50%.
5, the regulator generally on the working environment requirements are higher, mainly because the device's integrated circuit requires a better working environment, easy to damage; carbon brush speed is slow, the need to start the high pressure can not meet the start requirements; The cost is slightly higher than the product, the mission life is short, the maintenance cost is higher, this product can solve the instantaneous high pressure start, the purchase cost and the maintenance cost are lower, and the installation is simple and the environment is not demanding, the volume is small, is convenient for the flow operation.
As shown in Figure 6, this product has a good resistance to high current impact characteristics, can withstand the motor starting current 5-7 times the current impact; booster with four manual adjustment gear, in the input voltage on the basis of +25 V, + 50V, + 75V, +100V, the customer can select the appropriate gear according to the output voltage, easy to adjust, but also according to the scene to customize any voltage.
没有评论:
发表评论